Ombrière SUDI - Sustainable Urban Design & Innovation

Environmental technology (envirotech) or green technology (greentech), also known as ''

clean technology Clean technology, in short cleantech, is any process, product, or service that reduces negative environmental impacts through significant energy efficiency improvements, the sustainable use of resources, or environmental protection activities. Cle ...

'' (''cleantech''), is the application of one or more of

environmental science Environmental science is an interdisciplinary academic field that integrates physics, biology, and geography (including ecology, chemistry, plant science, zoology, mineralogy, oceanography, limnology, soil science, geology and physical geograp ...

green chemistry Green chemistry, also called sustainable chemistry, is an area of chemistry and chemical engineering focused on the design of products and processes that minimize or eliminate the use and generation of hazardous substances. While environmental che ...

environmental monitoring Environmental monitoring describes the processes and activities that need to take place to characterize and monitor the quality of the environment. Environmental monitoring is used in the preparation of environmental impact assessments, as well a ...

and

electronic Electronic may refer to: *Electronics, the science of how to control electric energy in semiconductor * ''Electronics'' (magazine), a defunct American trade journal *Electronic storage, the storage of data using an electronic device *Electronic co ...

devices to monitor, model and conserve the

natural environment The natural environment or natural world encompasses all life, living and non-living things occurring nature, naturally, meaning in this case not Artificiality, artificial. The term is most often applied to the Earth or some parts of Earth. Th ...

and resources, and to curb the negative impacts of human involvement. The term is also used to describe sustainable energy generation technologies such as

photovoltaics Photovoltaics (PV) is the conversion of light into electricity using semiconducting materials that exhibit the photovoltaic effect, a phenomenon studied in physics, photochemistry, and electrochemistry. The photovoltaic effect is commercially us ...

wind turbine A wind turbine is a device that converts the kinetic energy of wind into electrical energy. Hundreds of thousands of large turbines, in installations known as wind farms, now generate over 650 gigawatts of power, with 60 GW added each year. ...

s, etc.

Sustainable development Sustainable development is an organizing principle for meeting human development goals while also sustaining the ability of natural systems to provide the natural resources and ecosystem services on which the economy and society depend. The des ...

is the core of ''environmental technologies''. The term ''environmental technologies'' is also used to describe a class of electronic devices that can promote sustainable management of resources.

Purification and waste management

Examples

Biofiltration Biofiltration is a pollution control technique using a bioreactor containing living material to capture and biologically degrade pollutants. Common uses include processing waste water, capturing harmful chemicals or silt from surface runoff, an ...

Bioreactor A bioreactor refers to any manufactured device or system that supports a biologically active environment. In one case, a bioreactor is a vessel in which a chemical reaction, chemical process is carried out which involves organisms or biochemistry, ...

Bioremediation Bioremediation broadly refers to any process wherein a biological system (typically bacteria, microalgae, fungi, and plants), living or dead, is employed for removing environmental pollutants from air, water, soil, flue gasses, industrial effluent ...

Desalination Desalination is a process that takes away mineral components from saline water. More generally, desalination refers to the removal of salts and minerals from a target substance, as in Soil salinity control, soil desalination, which is an issue f ...

Thermal depolymerization Thermal depolymerization (TDP) is the process of converting a polymer into a monomer or a mixture of monomers, by predominantly thermal means. It may be catalysed or un-catalysed and is distinct from other forms of depolymerisation which may rely o ...

Composting toilet A composting toilet is a type of dry toilet that treats human waste by a biological process called composting. This process leads to the decomposition of organic matter and turns human waste into compost-like material. Composting is carried ou ...

Pyrolysis The pyrolysis (or devolatilization) process is the thermal decomposition of materials at elevated temperatures, often in an inert atmosphere. It involves a change of chemical composition. The word is coined from the Greek-derived elements ''py ...

Water purification

Water purification Water purification is the process of removing undesirable chemicals, biological contaminants, suspended solids, and gases from water. The goal is to produce water that is fit for specific purposes. Most water is purified and disinfected for hu ...

: The whole idea/concept of having dirt/germ/pollution free water flowing throughout the environment. Many other phenomena lead from this concept of purification of water. Water pollution is the main enemy of this concept, and various campaigns and activists have been organized around the world to help purify water.

Air purification

Air purification An air purifier or air cleaner is a device which removes contaminants from the air in a room to improve indoor air quality. These devices are commonly marketed as being beneficial to allergy sufferers and asthmatics, and at reducing or eliminating ...

: Basic and common green plants can be grown indoors to keep the air fresh because all plants remove CO₂ and convert it into

oxygen Oxygen is the chemical element with the symbol O and atomic number 8. It is a member of the chalcogen group in the periodic table, a highly reactive nonmetal, and an oxidizing agent that readily forms oxides with most elements as wel ...

. The best examples are: ''

Dypsis lutescens ''Dypsis lutescens'', also known as golden cane palm, areca palm, yellow palm, butterfly palm, or bamboo palm, is a species of flowering plant in the family (biology), family Arecaceae, native plant, native to Madagascar and naturalized in the ...

'', ''

Sansevieria trifasciata ''Dracaena trifasciata'' is a species of flowering plant in the family Asparagaceae, native to tropical West Africa from Nigeria east to the Congo. It is most commonly known as the snake plant, Saint George's sword, mother-in-law's tongue, and v ...

'', and ''

Epipremnum aureum ''Epipremnum aureum'' is a species in the arum family Araceae, native to Mo'orea in the Society Islands of French Polynesia. The species is a popular houseplant in temperate regions but has also become naturalised in tropical and sub-tropical fore ...

''. Besides using the plants themselves, some species of bacteria can also be added to the leaves of these plants to help remove toxic gases, such as

toluene Toluene (), also known as toluol (), is a substituted aromatic hydrocarbon. It is a colorless, water-insoluble liquid with the smell associated with paint thinners. It is a mono-substituted benzene derivative, consisting of a methyl group (CH3) at ...

Sewage treatment

Sewage treatment Sewage treatment (or domestic wastewater treatment, municipal wastewater treatment) is a type of wastewater treatment which aims to remove contaminants from sewage to produce an effluent that is suitable for discharge to the surrounding envir ...

is conceptually similar to water purification. Sewage treatments are very important as they purify water per levels of pollution. The most polluted water is not used for anything, and the least polluted water is supplied to places where water is used affluently. It may lead to various other concepts of environmental protection, sustainability, etc.

Environmental remediation

Environmental remediation Environmental remediation deals with the removal of pollution or contaminants from environmental media such as soil, groundwater, sediment, or surface water. Remedial action is generally subject to an array of regulatory requirements, and may al ...

is the removal of pollutants or contaminants for the general protection of the environment. This is accomplished by various chemical, biological, and bulk methods.

Solid waste management

Solid waste management Waste management or waste disposal includes the processes and actions required to manage waste from its inception to its final disposal. This includes the collection, transport, treatment and disposal of waste, together with monitoring ...

is the purification, consumption, reuse, disposal and treatment of

solid waste Municipal solid waste (MSW), commonly known as trash or garbage in the United States and rubbish in Britain, is a waste type consisting of everyday items that are discarded by the public. "Garbage" can also refer specifically to food waste, ...

that is undertaken by the government or the ruling bodies of a city/town.

Sustainable energy

Concerns over pollution and greenhouse gases have spurred the search for sustainable alternatives to our current fuel use. The global reduction of greenhouse gases requires the adoption of energy conservation as well as sustainable generation. That environmental harm reduction involves global changes such as: * reducing air pollution and methane from biomass * virtually eliminating fossil fuels for vehicles, heat, and electricity, left in the ground. * widespread use of public transport, battery and fuel cell vehicles * more wind/solar/water generated electricity * reducing peak demands with carbon taxes and time of use pricing. Since fuel used by industry and transportation account for the majority of world demand, by investing in conservation and efficiency (using less fuel), pollution and greenhouse gases from these two sectors can be reduced around the globe. Advanced energy efficient

electric motor An electric motor is an Electric machine, electrical machine that converts electrical energy into mechanical energy. Most electric motors operate through the interaction between the motor's magnetic field and electric current in a Electromagneti ...

(and

electric generator In electricity generation, a generator is a device that converts motive power (mechanical energy) or fuel-based power (chemical energy) into electric power for use in an external circuit. Sources of mechanical energy include steam turbines, gas ...

) technology that are cost effective to encourage their application, such as variable speed generators and

efficient energy use Efficient energy use, sometimes simply called energy efficiency, is the process of reducing the amount of energy required to provide products and services. For example, insulating a building allows it to use less heating and cooling energy to ...

, can reduce the amount of

carbon dioxide Carbon dioxide (chemical formula ) is a chemical compound made up of molecules that each have one carbon atom covalently double bonded to two oxygen atoms. It is found in the gas state at room temperature. In the air, carbon dioxide is transpar ...

(CO₂) and

sulfur dioxide Sulfur dioxide (IUPAC-recommended spelling) or sulphur dioxide (traditional Commonwealth English) is the chemical compound with the formula . It is a toxic gas responsible for the odor of burnt matches. It is released naturally by volcanic activ ...

(SO₂) that would otherwise be introduced to the atmosphere, if electricity were generated using fossil fuels.

Greasestock Greasestock was an American event held yearly in Yorktown Heights, New York. Exhibitors showcase a variety of alternative energy vehicles, as well as exhibits with a sustainable lifestyle theme. Although it is illegal in New York to power a vehic ...

is an event held yearly in

Yorktown Heights Yorktown Heights is a census-designated place (CDP) in the town of Yorktown in Westchester County, New York, United States. The population was 1,781 at the 2010 census. History Yorktown Heights is in the town of Yorktown, New York, in northern ...

New York New York most commonly refers to: * New York City, the most populous city in the United States, located in the state of New York * New York (state), a state in the northeastern United States New York may also refer to: Film and television * '' ...

which is one of the largest showcases of environmental technology in the

United States The United States of America (U.S.A. or USA), commonly known as the United States (U.S. or US) or America, is a country primarily located in North America. It consists of 50 states, a federal district, five major unincorporated territorie ...

. Some scholars have expressed concern that the implementation of new environmental technologies in highly-developed national economies may cause economic and social disruption in less-developed economies.

Examples

Hydroelectricity Hydroelectricity, or hydroelectric power, is Electricity generation, electricity generated from hydropower (water power). Hydropower supplies one sixth of the world's electricity, almost 4500 TWh in 2020, which is more than all other Renewabl ...

Wind power Wind power or wind energy is mostly the use of wind turbines to electricity generation, generate electricity. Wind power is a popular, sustainable energy, sustainable, renewable energy source that has a much smaller Environmental impact of wi ...

Wind turbine A wind turbine is a device that converts the kinetic energy of wind into electrical energy. Hundreds of thousands of large turbines, in installations known as wind farms, now generate over 650 gigawatts of power, with 60 GW added each year. ...

Ocean thermal energy conversion Ocean Thermal Energy Conversion (OTEC) uses the ocean thermal gradient between cooler deep and warmer shallow or surface seawaters to run a heat engine and produce useful work, usually in the form of electricity. OTEC can operate with a very hi ...

Solar power Solar power is the conversion of energy from sunlight into electricity, either directly using photovoltaics (PV) or indirectly using concentrated solar power. Photovoltaic cells convert light into an electric current using the photovoltaic e ...

Photovoltaic Photovoltaics (PV) is the conversion of light into electricity using semiconducting materials that exhibit the photovoltaic effect, a phenomenon studied in physics, photochemistry, and electrochemistry. The photovoltaic effect is commercially us ...

Wave energy Wave power is the capture of energy of wind waves to do useful work – for example, electricity generation, water desalination, or pumping water. A machine that exploits wave power is a wave energy converter (WEC). Waves are generated by wind ...

Electric vehicle An electric vehicle (EV) is a vehicle that uses one or more electric motors for propulsion. It can be powered by a collector system, with electricity from extravehicular sources, or it can be powered autonomously by a battery (sometimes cha ...

Heat pump A heat pump is a device that can heat a building (or part of a building) by transferring thermal energy from the outside using a refrigeration cycle. Many heat pumps can also operate in the opposite direction, cooling the building by removing h ...

Hydrogen fuel cell A fuel cell is an electrochemical cell that converts the chemical energy of a fuel (often hydrogen) and an oxidizing agent (often oxygen) into electricity through a pair of redox reactions. Fuel cells are different from most batteries in requ ...

Green computing Green computing, green IT, or ICT sustainability, is the study and practice of environmentally sustainable computing or IT. The goals of green computing are similar to green chemistry: reduce the use of hazardous materials, maximize energy effici ...

Energy conservation Energy conservation is the effort to reduce wasteful energy consumption by using fewer energy services. This can be done by using energy more effectively (using less energy for continuous service) or changing one's behavior to use less service (f ...

Doubly fed electric machine Doubly-fed electric machines also slip-ring generators are electric motors or electric generators, where both the field magnet windings and armature windings are separately connected to equipment outside the machine. By feeding adjustable freque ...

* Energy saving modules

Renewable energy

Renewable energy Renewable energy is energy that is collected from renewable resources that are naturally replenished on a human timescale. It includes sources such as sunlight, wind, the movement of water, and geothermal heat. Although most renewable energy ...

is the

energy In physics, energy (from Ancient Greek: ἐνέργεια, ''enérgeia'', “activity”) is the quantitative property that is transferred to a body or to a physical system, recognizable in the performance of work and in the form of heat a ...

that can be replenished easily. For years we have been using sources such as

wood Wood is a porous and fibrous structural tissue found in the stems and roots of trees and other woody plants. It is an organic materiala natural composite of cellulose fibers that are strong in tension and embedded in a matrix of lignin th ...

sun The Sun is the star at the center of the Solar System. It is a nearly perfect ball of hot plasma, heated to incandescence by nuclear fusion reactions in its core. The Sun radiates this energy mainly as light, ultraviolet, and infrared radi ...

water Water (chemical formula ) is an inorganic, transparent, tasteless, odorless, and nearly colorless chemical substance, which is the main constituent of Earth's hydrosphere and the fluids of all known living organisms (in which it acts as a ...

, etc. for means for producing energy. Energy that can be produced by natural objects like the sun, wind, etc. is considered to be renewable. Technologies that have been in usage include wind power, hydropower, solar energy, geothermal energy, and biomass/bioenergy.

Energy conservation

is the utilization of devices that require smaller amounts of energy in order to reduce the consumption of electricity. Reducing the use of electricity causes less fossil fuels to be burned to provide that electricity.

eGain forecasting

Egain forecasting is a method using forecasting technology to predict the future

weather Weather is the state of the atmosphere, describing for example the degree to which it is hot or cold, wet or dry, calm or stormy, clear or cloudy. On Earth, most weather phenomena occur in the lowest layer of the planet's atmosphere, the ...

's impact on a building. By adjusting the heat based on the weather forecast, the system eliminates redundant use of heat, thus reducing the energy consumption and the emission of

greenhouse gas A greenhouse gas (GHG or GhG) is a gas that Absorption (electromagnetic radiation), absorbs and Emission (electromagnetic radiation), emits radiant energy within the thermal infrared range, causing the greenhouse effect. The primary greenhouse ...

es.United States Patent 6098893
Comfort control system incorporating weather forecast data and a method for operating such a system (Inventor Stefan Berglund)

Education

Courses aimed at developing graduates with some specific skills in environmental systems or environmental technology are becoming more common and fall into three broads classes: *'' Environmental Engineering or Environmental Systems'' courses oriented towards a civil engineering approach in which structures and the landscape are constructed to blend with or protect the environment; *''

Environmental chemistry Environmental chemistry is the scientific study of the chemical and biochemical phenomena that occur in natural places. It should not be confused with green chemistry, which seeks to reduce potential pollution at its source. It can be defined as t ...

'', ''sustainable chemistry'' or ''environmental chemical engineering'' courses oriented towards understanding the effects (good and bad) of chemicals in the environment. Such awards can focus on mining processes, pollutants and commonly also cover biochemical processes; *''Environmental technology'' courses oriented towards producing electronic, electrical or electrotechnology graduates capable of developing devices and artefacts able to monitor, measure, model and control environmental impact, including monitoring and managing energy generation from renewable sources, and developing novel energy generation technologies.

References

External links

{{Authority control Bright green environmentalism *

Purification and waste management

Examples

Water purification

Air purification

Sewage treatment

Environmental remediation

Solid waste management

Sustainable energy

Examples

Renewable energy

Energy conservation

eGain forecasting

Education

See also

References

Further reading

External links